Open Access Single entry point for scale-up of Innovative Smart lightweight composite materials and components
OASIS in General
Lightweight structures and high-performance materials are one way of meeting CO2 requirements. The introduction of nanotechnologies in metal and polymer composites can be an answer to this challenge. The OASIS project is therefore developing an "Open Innovation Test Bed" for innovative, polymer- and aluminium-based smart lightweight composites, which is intended to accelerate innovations and drive nanotechnologies forward. To this end, it offers companies (especially SMEs) the opportunity to develop and test lightweight, high-performance, multifunctional, safe and environmentally friendly materials, components and structures, and to support their market introduction and commercialisation. In this way, SMEs gain access to unique facilities and knowledge. At the same time, the large financial investment often required for pre- or small-scale production series is avoided.
During the project, SMEs can test the capabilities of the "Open-Innovation Test Bed" via an Open Call!
Objectives and approach of OASIS
At EU level, facilities and production platforms for the design, development, testing and control/safety of nano-enabled, lightweight and multifunctional materials and components will be upgraded and upscaled to make them easier to access for European users and to facilitate industrial scale production. At the same time, the development of suitable inline quality control and product traceability systems for corresponding equipment is moving into focus.
In general, this is intended to advance materials research in the field of nanotechnology in composite materials and the application of these materials. More explicit objectives include a 15% improvement in industrial process parameters, a 20% faster verification of material performance, a 15% reduction in energy consumption in several sectors through the use of lighter materials in the product and process, and a 20% improvement in industrial productivity, reliability, environmental compatibility, durability and life-cycle costs.
Organisation of OASIS
The OASIS project comprises twelve manufacturing pilot lines in the field of nanotechnology, covering the entire process chain from nanoparticle development to the creation of a final product. This ensures high-quality, safe, competitive and environmentally friendly production. The potential of the production pilot lines will be validated by six industrial showcases in areas where lightweight products have a significant impact.
Role of AWI in the OASIS project
Within the framework of the OASIS project, we are researching one of the six showcases. We are responsible for the design, FE-calculation and (structural-) optimization of lightweight solutions. Together with industrial partners we develop a material-, production- and customer-specific high-performance lightweight structure.
In this context, components are considered under static and dynamic loads, which are optimized using biologically-inspired structures and the ELiSE algorithm. The optimization process considers not only the properties of the new nanotechnological materials, but also the design specifications and restrictions imposed by new manufacturing processes.
For this reason, our goal is to develop an optimization method that takes into account manufacturing processes and specifications as well as the latest bio-inspired approach to structural optimization for the development and improvement of lightweight structures in order to exploit the full potential of the new materials and manufacturing processes.
Adamant Composites https://www.adamant-composites.gr/
Fraunhofer Gesellschaft https://www.fraunhofer.de/
Pleione Energy http://www.pleione-energy.com/
Tecnalia Ventures https://www.tecnaliaventures.com/
TMBK Partners http://www.tmbk.pl/pl/
University of Patras http://www.upatras.gr/el
VDL Fibertech Industries https://www.vdlfibertechindustries.com/
- The OASIS Open Innovation Test Bed has launched an Open Call for Democases with the objective of providing support to institutions in the development of lightweight multifunctional products based on aluminium and polymer composites. Successful applicants to the OASIS Open Call will get free access to an ecosystem of 12 nanotechnology manufacturing pilot lines, providing nanomaterials, nano-intermediates, nano-enabled products and associated services. The selected applicants will be provided with customized support through a complete set of services integrating technical and business expertise which will enable them to build up sustainable business cases. If interested, please check OASIS’ website (LINK), browse through its Catalogue of services (LINK), read the conditions of the Call (LINK), and eventually apply with your Democase here (LINK).
The Call’s first cut-off date, after which proposals will be evaluated and selected for support, is on 31st January 2021. We strongly encourage all potential applicants to check the feasibility of their ideas prior to submitting their proposals. Please do so by contacting the HelpDesk at email@example.com or by calling this number +420 226 217 422.
We’ll be looking forward to supporting your innovative ideas!
- Within this project final papers can be carried out. Please send your application to Sandra Coordes (firstname.lastname@example.org).
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 814581.